Automatic construction site dewatering submersible pump

• Inflation class: F
• Protection class: IP68
• Cable length: 20 m
• Water temperature: up to 40°C
• Max water depth: 25 m

The motor and pump body are made of rigid cast iron for long-term durability. The maximum immersion depth is significantly increased by the high-pressure resistant mechanical seal.

Semi-open impeller made of high-chromium alloy. In combination with the wear plate (ductile iron), it allows to obtain superior durability. Efficient engine cooling thanks to the execution of a discharge channel integrated in the engine housing.

Space-saving design thanks to top outlet. Discharge height from 50mm to 150mm, motor from 1,5 kW to 15 kW. Hermetically sealed motors of less than 5kW are equipped with integrated thermal protection.

Intelligent control system:

• Protects against phase inversion, ensuring correct wheel rotation.
• Protects against open phase or wheel lock, preventing accidental damage.
• Automatically stops the pump in case of overload or abnormal voltage, with recovery after 5 minutes;
• The pump stops working at high temperature and restarts automatically after cooling to the specified temperature.
• The height of the water level sensor is adjustable to counteract the operation of the pump.
• The pump stops working within 60 seconds when the water level is lower than the water level probe, maintaining a stop time of 180 seconds; after these 180 seconds, when the water level is higher than the water level probe, the pump works again.
• Evaluation of the pump's operating history and malfunctions.